|
Other Fields of Automotive Engineering (Steering System) |
|
|
INVESTIGATING THE EFFECT OF WEIGHT REDUCTION OF ROD-END IN DRAG-LINK PRODUCT WITH FINITE ELEMENT ANALYSIS, FATIGUE TEST, AND A CASE STUDY
Erinç Uludamar, Mustafa Taş, Sami Gökberk Biçer, Cihan Yıldırım, Ebru Aykut Yıldırım, Kerimcan Çelebi
Int J Automot Technol. 2020;21(2):513-518. DOI: https://doi.org/10.1007/s12239-020-0048-1
|
|
|
|
|
Engine and Emissions, Fuels and Lubricants |
|
|
COMPARATIVE INVESTIGATION OF GASEOUS EMISSIONS AND PARTICLE EMISSION CHARACTERISTICS FROM TURBO-CHARGED DIRECT INJECTION (DI) ENGINE WITH GASOLINE AND LPG FUEL DEPENDING ON ENGINE CONTROL PARAMETERS
Seungho Ahn, Jaeho Cho, Sungha Baek, Kangjin Kim, Jinyoung Ko, Cha-Lee Myung, Simsoo Park
Int J Automot Technol. 2020;21(2):451-457. DOI: https://doi.org/IJAT-19-0211
|
|
|
|
|
Chassis, Connected Automated Vehicles and ITS, Electrical and Electronics, Vehicle Dynamics and Control |
|
|
DESIGN OF A ROBUST RACK POSITION CONTROLLER BASED ON 1-DIMENSIONAL AMESIM MODEL OF A STEER-BY-WIRE SYSTEM
Haseo Hwang, Kanghyun Nam
Int J Automot Technol. 2020;21(2):419-425. DOI: https://doi.org/10.1007/s12239-020-0039-2
 
|
Cited By 6 |
|
|
|
|
|
Heat Transfer, Fluid and Thermal Engineering |
|
|
REAL-FLUID MODELING FOR TURBULENT MIXING PROCESSES OF N-DODECANE SPRAY JET UNDER SUPERCIRITICAL PRESSURE
Kiyoung Jung, Yongmo Kim, Namsu Kim
Int J Automot Technol. 2020;21(2):397-406. DOI: https://doi.org/10.1007/s12239-020-0037-4
|
|
Cited By 9 |
|
|
|
|
|
Noise, Vibration and Harshness |
|
|
DESIGN AND GENERATION OF A TARGET SOUND TO ACHIEVE THE DESIRED SOUND QUALITY INSIDE A CAR CABIN
Seung Min Lee, Jiseon Back, Kanghyun An, Sang Kwon Lee
Int J Automot Technol. 2020;21(2):385-395. DOI: https://doi.org/10.1007/s12239-020-0036-5
|
|
Cited By 15 |
|
|
|
|
|
Human Factors and Ergonomics, Other Fields of Automotive Engineering |
|
|
INFLUENCE OF WEATHER CONDITIONS ON FATAL ROAD ACCIDENTS ON HIGHWAYS AND URBAN AND RURAL ROADS IN ROMANIA
Alin Drosu, Corneliu Cofaru, Mihaela Virginia Popescu
Int J Automot Technol. 2020;21(2):309-317. DOI: https://doi.org/10.1007/s12239-020-0029-4
|
|
Cited By 12 |
|
|
|
|
|
Vision and Sensors, Other Fields of Automotive Engineering |
|
|
RESEARCH ON MILLIMETER WAVE RADAR SIMULATION MODEL FOR INTELLIGENT VEHICLE
Xin Li, Weiwen Deng, Sumin Zhang, Yaxin Li, Shiping Song, Shanshan Wang, Guanyu Wang
Int J Automot Technol. 2020;21(2):275-284. DOI: https://doi.org/10.1007/s12239-020-0026-7
|
|
Cited By 12 |
|
|
|
|
|
Intelligent Vehicle/Transportation Systems |
|
|
DISTRIBUTED H∞ CONTROL OF PLATOON INTERACTED BY SWITCHING AND UNDIRECTED TOPOLOGY
Feng Gao, Fan-xia Lin, Bao Liu
Int J Automot Technol. 2020;21(1):259-268. DOI: https://doi.org/10.1007/s12239-020-0025-8
|
|
Cited By 16 |
|
|
|
|
|
Engine and Emissions, Fuels and Lubricants |
|
|
EXPERIMENTAL AND COMPUTATIONAL INVESTIGATION OF DIESEL AND GASOLINE INJECTION IN A DIRECT INJECTION COMPRESSION IGNITION ENGINE
Mohammad Nazemi Babadi, Saeid Kheradmand, Choongsik Bae
Int J Automot Technol. 2020;21(1):23-32. DOI: https://doi.org/10.1007/s12239-020-0003-1
|
|
Cited By 3 |
|
|
|
|
|
Engine and Emissions |
|
|
NUMERICAL ANALYSIS OF LOW SPEED PRE-IGNITION AND KNOCK PROCESS IN DOWNSIZED TURBOCHARGED DIRECT INJECTION ENGINES WITH ETHANOL-GASOLINE BLENDS
Li Ruichen, Xu Boyan, Qi Yunliang, Xu Weiyang
Int J Automot Technol. 2020;21(1):13-22. DOI: https://doi.org/10.1007/s12239-020-0002-2
|
|
Cited By 2 |
|
|
|
|
|
Body and Safety, Manufacturing, Materials and Recycling |
|
|
MINIMIZATION OF SURFACE DEFLECTION IN RECTANGULAR
EMBOSSING USING AUTOMATIC TRAINING OF ARTIFICIAL NEURAL
NETWORK AND GENETIC ALGORITHM
Sungmin Cho, Wanjin Chung
Int J Automot Technol. 2019;20(S):57-66. DOI: https://doi.org/10.1007/s12239-019-0128-2
|
|
Cited By 2 |
|
|
|
|
|
Body and Safety, Chassis, Manufacturing, Materials and Recycling |
|
|
OPTIMAL PROCESS DESIGN IN HOT FORGING
IN TERMS OF GRAIN FLOW QUALITY
Min Cheol Kim, Suk Hwan Chung, Man Soo Joun
Int J Automot Technol. 2019;20(S):45-56. DOI: https://doi.org/10.1007/s12239-019-0127-3
|
|
Cited By 8 |
|
|
|
|
|
Engine, Emission Technology |
|
|
MODELING ANALYSIS ON IMPROVING CYLINDER BALANCE IN A
GASOLINE ENGINE USING ELECTROMAGNETIC VALVE TRAIN
Yaxuan Xu, Siqin Chang, Liang Liu, Tianbo Wang, Maoyang Hu
Int J Automot Technol. 2019;20(6):1195-1203. DOI: https://doi.org/10.1007/s12239-019-0112-x
|
|
Cited By 2 |
|
|
|
|
|
Heat Transfer, Fluid and Thermal Engineering |
|
|
NUMERICAL STUDY OF PRE-VENTILATION EFFECTS
ON CABIN TEMPERATURE USING SOLAR SUNROOF
Daewoong Lee, Hoseong Lee
Int J Automot Technol. 2019;20(6):1173-1181. DOI: https://doi.org/10.1007/s12239-019-0110-z
|
|
Cited By 5 |
|
|
|
|
|
Transmission and Driveline, Vehicle Dynamics and Control |
|
|
OPTIMIZATION CONTROL OF CVT CLUTCH ENGAGEMENT
BASED ON MPC
Ling Han, Hongxiang Liu, Jinwu Wang, Shaosong Li, Leilei Ren
Int J Automot Technol. 2019;20(6):1161-1171. DOI: https://doi.org/10.1007/s12239-019-0109-5
|
|
Cited By 10 |
|
|
|
|
|
Electric, Fuel Cell, and Hybrid Vehicle |
|
|
ADAPTIVE CONTROL STRATEGY EXTRACTED FROM DYNAMIC
PROGRAMMING AND COMBINED WITH DRIVING PATTERN
RECOGNITION FOR SPHEB
Xinyou Lin, Hailin Li
Int J Automot Technol. 2019;20(5):1009-1022. DOI: https://doi.org/10.1007/s12239-019-0095-7
|
|
Cited By 19 |
|
|
|
|
|
Electrical Vehicle |
|
|
SCALABLE HOLISTIC SCHEDULING OF SAFETY-CRITICAL
SYSTEMS ON IN-VEHICLE TDMA NETWORKS
Armaghan Darbandi, Myung Kyun Kim
Int J Automot Technol. 2019;20(5):873-883. DOI: https://doi.org/10.1007/s12239-019-0081-0
|
|
|
|
|
Materials and Recycling, Other Fields of Automotive Engineering |
|
|
SIMULATING TIRE INFLATION PRESSURE LOSS RATE TEST BY
THE IDEAL MATERIAL METHOD
Chen Liang, Xinyu Zhu, Changda Li, Guolin Wang, Liu Ji
Int J Automot Technol. 2019;20(4):789-800. DOI: https://doi.org/10.1007/s12239-019-0074-z
|
|
Cited By 5 |
|
|
|
|
|
Fuels and Lubricants |
|
|
INFLUENCE OF BIODIESEL BLENDED IN GASOLINE-BASED FUELS ON MACROSCOPIC SPRAY STRUCTURE FROM A DIESEL INJECTOR
Sakda Thongchai, Ocktaeck Lim
Int J Automot Technol. 2019;20(4):701-711. DOI: https://doi.org/10.1007/s12239-019-0066-z
|
|
Cited By 6 |
|
|
|
|
|
Chassis |
|
|
LPV/H∞ CONTROLLER DESIGN FOR PATH TRACKING OF AUTONOMOUS GROUND VEHICLES THROUGH FOUR-WHEEL STEERING AND DIRECT YAW-MOMENT CONTROL
Peng Hang, Xinbo Chen, Fengmei Luo
Int J Automot Technol. 2019;20(4):679-691. DOI: https://doi.org/10.1007/s12239-019-0064-1
|
|
Cited By 73 |
|
|
|
|
|
Engine and Emissions, Transmission and Driveline |
|
|
ENGINE NET TORQUE COMPENSATION THROUGH DRIVELINE TORQUE ESTIMATION IN A PARALLEL HYBRID VEHICLE
Jinrak Park, Seibum Choi, Jiwon Oh, Jeongsoo Eo
Int J Automot Technol. 2019;20(3):619-627. DOI: https://doi.org/10.1007/s12239-019-0059-y
|
|
Cited By 6 |
|
|
|
|
|
Fuel Cell, Hybrid Vehicle |
|
|
DYNAMIC MODELING OF BRAKE IN POWER-SPLIT DHT AND PRESSURE TRACKING CONTROL WITH SLIDING MODE VARIABLE STRUCTURE METHOD
Zhiguo Zhao, Mengna Li, Chen Wang, Lanxing Jiang, Maoyao Wang
Int J Automot Technol. 2019;20(3):521-530. DOI: https://doi.org/10.1007/s12239-019-0049-0
|
|
Cited By 6 |
|
|
|
|
|
Intelligent Vehicle/Transportation Systems |
|
|
MODELLING THE INTRUSIVE FEELINGS OF ADVANCED DRIVER ASSISTANCE SYSTEMS BASED ON VEHICLE ACTIVITY LOG DATA: CASE STUDY FOR THE LANE KEEPING ASSISTANCE SYSTEM
Kyudong Park, Jiyoung Kwahk, Sung H. Han, Minseok Song, Dong Gu Choi, Hyeji Jang, Dohyeon Kim, Young Deok Won, In Sub Jeong
Int J Automot Technol. 2019;20(3):455-463. DOI: https://doi.org/10.1007/s12239-019-0043-6
|
|
Cited By 12 |
|
|
|
|
|
Body and Safety |
|
|
FINITE ELEMENT MODEL OF A HIGH-STATURE MALE PEDESTRIAN FOR SIMULATING CAR-TO-PEDESTRIAN COLLISIONS
Wansoo Pak, Yunzhu Meng, Jeremy Schap, Bharath Koya, Scott F. Gayzik, Costin D. Untaroiu
Int J Automot Technol. 2019;20(3):445-453. DOI: https://doi.org/10.1007/s12239-019-0042-7
|
|
Cited By 16 |
|
|
|
|
|
Engine and Emissions |
|
|
EXPERIMENTAL STUDY OF PARTICULATE EMISSION
CHARACTERISTICS FROM A GASOLINE DIRECT INJECTION ENGINE
DURING STARTING PROCESS
Yan Su, Fangxi Xie, Wei Hong, Xiaoping Li, Tingting Hu
Int J Automot Technol. 2019;20(2):411-421. DOI: https://doi.org/10.1007/s12239-019-0040-9
|
|
Cited By 4 |
|
|
|
|
|
Body and Safety |
|
|
ONLINE MEASURING METHOD FOR THE ENGINES’ IVC TIMING
BASED ON THE IN-CYLINDER PRESSURE FLUCTUATION
Fushui Liu, Zhongjie Shi, Yikai Li, Yang Hua, Yanlin Chen, Yongli Gao
Int J Automot Technol. 2019;20(2):365-377. DOI: https://doi.org/10.1007/s12239-019-0036-5
|
|
Cited By 1 |
|
|
|
|
|
Manufacturing |
|
|
SHAPE DEFECTS IN THE FLEXIBLE ROLL FORMING OF AUTOMOTIVE PARTS
Young Yun Woo, Sang Wook Han, Il Yeong Oh, Young Hoon Moon
Int J Automot Technol. 2019;20(2):227-236. DOI: https://doi.org/10.1007/s12239-019-0022-y
|
|
Cited By 15 |
|
|
|
|
|
Vehicle Dynamics |
|
|
ACTIVE ROLL PREVIEW CONTROL WITH V2V COMMUNICATION
Seongjin Yim
Int J Automot Technol. 2019;20(1):169-175. DOI: https://doi.org/10.1007/s12239-019-0016-9
|
|
Cited By 11 |
|
|
|
|
|
Engine, Emission Technology |
|
|
MODEL-BASED CONTROL OF ELECTROMAGNETIC VALVE ACTUATORS FOR ENGINE SPEED CONTROL
Huitao Chen, Siqin Chang, Aimin Fan
Int J Automot Technol. 2019;20(1):127-135. DOI: https://doi.org/10.1007/s12239-019-0012-0
|
|
|
|
|
Engine, Emission Technology |
|
|
RESEARCH ON THE INFLUENCE OF HYDROGEN AND OXYGEN FUEL OBTAINED FROM WATER ELECTROLYSIS ON COMBUSTION STABILITY OF SHALE GAS ENGINES
Liu Shuai, Wang Zhong, Jia He Kun, Chen Lin
Int J Automot Technol. 2019;20(1):119-125. DOI: https://doi.org/10.1007/s12239-019-0011-1
|
|
Cited By 4 |
|
|
|
|
> Browse Articles > Search
